 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| lifecyclephase: revision : 4 expired period: forever release date:2013-06-06 13:23:31.0 1 copyright ? 2013, everlight all rights reserved. release date : 5/31/2013. issue no:dir-0000953 . rev:4 www.everlight.com 1.9mm round subminiature ?z-bend? lead infrared led ir91-21c/tr10 features ? small double-end package ? high reliability ? low forward voltage ? good spectral matching to si photodetector ? pb free ? the product itself will remain within rohs compliant version. descriptions ir91-21c/tr10 is an infrared emitting diode in miniature smd package which is molded in a water clear plastic with spherical top view lens. the device is spectrally matched with silicon photodiode and phototransistor. applications ? pcb mounted infrared sensor ? infrared emitting for miniature light barrier ? floppy disk drive ? optoelectronic switch ? smoke detector device selection guide part category chip material lens color ir gaalas water clear
lifecyclephase: revision : 4 expired period: forever release date:2013-06-06 13:23:31.0 technical data sheet 1.9mm round subminiature ?z-bend? lead infrared led ir91-21c/tr10 2 copyright ? 2013, everlight all rights reserved. release date : 5/31/2013. issue no: dir-0000953. rev:4 www.everlight.com package dimensions notes: 1.all dimensions are in millimeters 2.tolerances unless dimensions ? 0.1mm lifecyclephase: revision : 4 expired period: forever release date:2013-06-06 13:23:31.0 technical data sheet 1.9mm round subminiature ?z-bend? lead infrared led ir91-21c/tr10 3 copyright ? 2013, everlight all rights reserved. release date : 5/31/2013. issue no: dir-0000953. rev:4 www.everlight.com absolute maximum ratings (ta=25 ) parameter symbol rating units continuous forward current i f 65 ma reverse voltage v r 5 v operating temperature t opr -25 ~ +85 storage temperature t stg -40 ~ +85 soldering temperature *1 t sol 260 power dissipation at(or below) 25 free air temperature p d 130 mw notes: *1: soldering time 5 second electro-optical characteristics (ta=25 ) parameter symbol condition min typ max units radiant intensity i e i f =20ma 3.0 5.0 mw /sr peak wavelength ? p i f =20ma -- 940 -- nm spectral bandwidth ? i f =20ma -- 45 -- nm forward voltage v f i f =20ma -- 1.2 1.5 v reverse current i r v r =5v -- -- 10 ? a view angle 2 1/2 i f =20ma -- 25 -- deg lifecyclephase: revision : 4 expired period: forever release date:2013-06-06 13:23:31.0 technical data sheet 1.9mm round subminiature ?z-bend? lead infrared led ir91-21c/tr10 4 copyright ? 2013, everlight all rights reserved. release date : 5/31/2013. issue no: dir-0000953. rev:4 www.everlight.com 0 10 10 1 10 2 3 10 4 1 2 3 4 880 0 20 40 60 80 100 980 940 900 920 960 1020 1000 1040 i f =20ma ta=25c 0 -40 -20 40 20 0 60 100 80 typical electro-optical characteristics curves fig.1 forward current vs. fig.2 spectral distribution ambient temperature ' j h ' p s x b s e $ v s s f o u w t ' p s x b s e 7 p m u b h f lifecyclephase: revision : 4 expired period: forever release date:2013-06-06 13:23:31.0 technical data sheet 1.9mm round subminiature ?z-bend? lead infrared led ir91-21c/tr10 5 copyright ? 2013, everlight all rights reserved. release date : 5/31/2013. issue no: dir-0000953. rev:4 www.everlight.com typical electro-optical characteristics curves ' j h 3 f m b u j w f 3 b e j b o u * o u f o t j u z w t " o h v m b s % j t q m b d f n f o u lifecyclephase: revision : 4 expired period: forever release date:2013-06-06 13:23:31.0 technical data sheet 1.9mm round subminiature ?z-bend? lead infrared led ir91-21c/tr10 6 copyright ? 2013, everlight all rights reserved. release date : 5/31/2013. issue no: dir-0000953. rev:4 www.everlight.com precautions for use 1. over-current-proof customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package, the leds should be kept at 30 or less and 90%rh or less. 2.3 the leds should be used within a year. 2.4 after opening the package, the leds should be kept at 30 or less and 70%rh or less. 2.5 the leds should be used within 168 hours (7 days) after opening the package. 2.6 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 ? 5 for 24 hours. 3. soldering condition 3.1 pb-free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board. lifecyclephase: revision : 4 expired period: forever release date:2013-06-06 13:23:31.0 technical data sheet 1.9mm round subminiature ?z-bend? lead infrared led ir91-21c/tr10 7 copyright ? 2013, everlight all rights reserved. release date : 5/31/2013. issue no: dir-0000953. rev:4 www.everlight.com 4.soldering iron each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double-head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing. lifecyclephase: revision : 4 expired period: forever release date:2013-06-06 13:23:31.0 technical data sheet 1.9mm round subminiature ?z-bend? lead infrared led ir91-21c/tr10 8 copyright ? 2013, everlight all rights reserved. release date : 5/31/2013. issue no: dir-0000953. rev:4 www.everlight.com package dimensions note: the tolerances unless mentioned is ? 0.1mm ,unit = mm carrier tape dimensions:loaded quantity 1000 pcs per reel note: the tolerances unless mentioned is ? 0.1mm ,unit = mm lifecyclephase: revision : 4 expired period: forever release date:2013-06-06 13:23:31.0 technical data sheet 1.9mm round subminiature ?z-bend? lead infrared led ir91-21c/tr10 9 copyright ? 2013, everlight all rights reserved. release date : 5/31/2013. issue no: dir-0000953. rev:4 www.everlight.com label form specification cpn: customer?s production number p/n : production number qty: packing quantity cat: ranks hue: peak wavelength ref: reference lot no: lot number notes 1. above specification may be changed without notice. everlight will reserve authority on material change for above specification. 2. when using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. everlight assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. these specification sheets include materials protected under copyright of everlight corporation. please don?t reproduce or cause anyone to reproduce them without everlight? sconsent. everlight electronics co., ltd. tel: 886-2-2685-6688 office: no. 6-8, zhonghua rd., shulin dist., fax: 886-2685-2699 d 6897 new taipei city 23860, taiwan http://www.everlight.com |
Price & Availability of IR91-21C-TR10-15
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |